USA Flag Design - Hydrographic Auto Darkening Welding Hood

No reviews yet Write a Review

$80.00

SKU:: ml-HDWH-711

Current Stock:

Qty:

Description

Hydro Dipped
Auto Darkening Welding Hood
USA Flag Design Design

Introducing our new line of hydro dipped welding hoods. We start with our best value auto darkening Welding Hoods by Pyramex. This hood is dipped with a white smoke design which covers the surface of the welding hood. Each hood is dipped one at a time so the placement of the pattern will slightly different. Once dipped the hood is coated with a high gloss protective finish. Before hydro dipping each lens is removed from the shell and replaced back in the helmet followed by testing for accuracy before being shipped.

These lenses of the auto darkening hoods react to the light from the welding process. They can adjust with an easy control knob on the left side of the helmet adjustable from a AWS shade 9 to a shade 13. The lens measures 4 inches wide by 2 inches high and the auto darkening welding lens is adjustable for sensitivity/delays to fine tune the shading of the lens. To stay safe and perform your welds correctly it features a high-speed lens that operates at 1/30000n seconds. Finally, the Pyramex Auto Darkening helmet also comes with 4 independent arc sensors that are set up in a staggered design to deliver reliable arc detection.

These outer hood features a lightweight shell construction made with a high impact resistant nylon material. They also features an ergonomic design with the suspension that adjust fully to get the best possible fit. The suspensions of the auto darkening welding hood adjust to fit the contour of the head as well as to adjust the tension making it easier to flip the hood up and down with comfort and ease.

Features:

The helmet protects the head, neck and face
Eliminates the issue of welder’s fatigue
Precision lens operates at 1/30000 seconds
Fully adjustable nylon suspension
With a strong and lightweight shell
Has auto darkening from shade AWS 9 to 13

Notes:

Since the welding hoods have been modified from the factory, we can not say they are ANSI approved; however, we are taking a NEW ANSI approved welding hood then adding several layers of paint, ink, and glossy coating to the outside shell.
Being that the image is flat and it is being placed on a very rounded surface, the pattern might have a little stretching as it appears on the back of the welding hood, it kind of gives the look of a windswept affect towards the back of the Welding Hood.
Currently we have all the patterns in stock, and we can usually produce the hats in 1-2 days. However, in the case of back orders or larger orders there may be an additional 2-4 day lead time.